Banner

Anion Exchange Membrane,for use with a supporting electrolyte Grade RT

INQUIRY
Catalog Number ACMA00062901
Description This is an anion exchange membrane with a dry thickness of 50 microns and is designed for use with a supporting electrolyte. It has been optimized for use in alkaline water electrolyzers and CO2 electrolyzers. The membrane will be shipped with an ethylene glycol plasticizer to prevent cracking. The plasticizer is designed to wash out during activation.
Notice For Use For electrochemical CO2 reduction applications, the anion exchange membrane should be converted to the carbonate or bicarbonate form by treating the membrane initially with 0.1 to 0.5 M KOH or NaOH solution and then with 0.1 to 0.5 M water soluble carbonate or bicarbonate salt solutions (such as potassium carbonate or potassium bicarbonate that is dissolved in de-ionized water or distilled water). Fully submerging the anion exchange membrane into KOH or NaOH solution for 6 to 12 hours and then to the desired carbonate or bicarbonate salt solution for a period of 48-72 hours would be sufficient to fully convert the membrane into either carbonate or bicarbonate form. After rinsing the membrane (which is in the carbonate form) with deionized water or distilled water, it can be assembled inside the electrochemical setup for electrochemical CO2 reduction experiments. While the submersion of the membrane into the KOH or NaOH can be skipped, for such situations, a longer submersion time may be required in order to fully convert the membrane to carbonate or bicarbonate form. Initial conversion to OH- form significantly improves the carbonate ion exchange process due to expanded pore sizes.
Size 22 cm x 28 cm
Thickness 50 microns
Type Anion

If the product of interest is not available in our catalog, please contact us to see if there is any relevant stock or other purchase channels.

Online Inquiry
Verification code

CONTACT a Alfa Chemistry Team Member

GET STARTED NOW