Non-reinforced Cation Exchange Membrane,Thickness:30𝜇m

Catalog Number	ACMA00062953
Description	This product is a non-reinforced Cation Exchange Membrane (CEM) with very low resistance, high selectivity and high stability in pH acidic and basic environments.
Density	4.0 - 4.2 mg·cm-2
Application	Electrodialysis for demineralisation, desalination, acid recovery applications and others.
Storage	Dry form: Membranes can be stored dry for an unlimited period of time. However, the membrane must be conditioned (washed and rinsed) before use. Wet form: Available for short- and medium-term storage (hours to weeks) in unsealed containers in 0.5 - 1.5 wt% NaCl solution or similar neutral pH electrolyte.
Backing Foil	PET Foil
Bubble Point	> 3 bar (Test in Water)
Color Form	Slightly Brown
Delivery Form	Dry
Dimensional Swelling	0
Electrical Conductivity	3.9 (in Na+ form) mS·cm-1
Elongation At Break	128 - 190 %
Hydroxyl Transfer Rate	120 - 130 µmol·min-1·cm-2
Ionic Form	H-form
Non-Std Modulus	2030 - 2480 MPa
Notice For Use	Membranes are delivered in H and dry versions. Depending on the application and cell design, assembly can be done in dry (without pretreatment) or wet form. For optimal performance, it is recommended to rinse the membrane in a NaCl solution (e.g., 0.5 M NaCl solution at 25°C for 24 hours) to remove any additives on the membrane. Place the membrane sample between stabilizing mesh/spacers to avoid curling. Do not let the film dry as micro-cracks may appear during shrinkage.
pH	1 - 14
Reinforcement	None
Selectivity	0.99
Sheet Resistance	0.84 (in Na+ form) Ω·cm2
Size	10 x 10 cm, 20 x 30 cm
Tensile Strength	46 - 66 MPa
Thickness	30 micrometers (1.19 mil)
Total Exchange Capacity	1.43 (in Na+ form) meq/g
Type	Cation
Water Absorption	22 wt % (in H2O at 25°C)
Yield Strength	46 - 60 MPa at 23°C / 53 % R.H.